Spare parts for this product (2)
Taifun® GT ONE - The affordable entry into the world of rebuildable atomizers from Taifun® - The definition of high end MADE IN GERMANY
The Taifun® GT ONE is the first atomizer from Taifun® in the price range up to €100 and is still 100% Made in Germany.
Visually based on the first Taifun® GT, it is not a remake or facelift model. The internal structure of the evaporator chamber and the build deck differ fundamentally from the original Taifun® GT and correspond more to a revised version of the Taifun® GT III. The Taifun® GT ONE is a pure single coil atomizer designed for MTL and restrictive DL vaping and is not only aimed at users who prefer a noticeable throat hit. The included threaded screw can optionally be used for this. Due to the changed compression conditions, the evaporator may feel a little more airy, depending on your own draw type, and the throat hit can be strengthened as a result.
There is a replaceable Air Pin with a diameter of 1.2 mm (included in package) in the base directly under the coil. Air pins with diameters of 0.8 mm, 1.0 mm, 1.5 mm and 1.8 mm are optionally available. These are made entirely of medical grade stainless steel. The Air Pins sit very tightly in the base to exclude any secondary air. After purchasing a certain pin or after using it for a long time, it is advisable to dismantle the positive pole in order to be able to replace the Air Pin more easily. The Taifun® GT One completely dispenses with air flow control.
A liquid control is not available. The Taifun® GT ONE is classically filled from below. For filling, it is advisable to hold the tank in your hand at a slight angle and turn it at the same time (so that the liquid is distributed more quickly and does not run into the chimney). It is also advisable to look through the tank from the outside and not from above.
Brief overview of the device properties of the Taifun® GT ONE
- Single coil rebuildable atomizer
- 23mm diameter
- 46 mm height (visible height without DripTip)
- Bottom fill
- variable restrictive air supply (adjustable via optionally available air pins)
- closable air channel of 1.6 mm diameter to increase the throat hit
- 510 DripTip of the Taifun® GTR (4 mm inner diameter)
- Stainless steel 1.4301, PEEK, PSU
- special instructions
Avoid extremely acidic liquids and flavors. These can possibly interact with the PSU tank. Basically, it is not a question of taste, so menthol, cooling and many other well-known flavorings are not a problem. But especially with pure citrus aromas, it cannot be ruled out that these will affect the tank at some point. We advise against the use of nicotine salt liquids in the Taifun® GT ONE. We cannot guarantee that these products will not damage the PSU tank.
Package contents:
- 1 x Taifun® GT ONE incl. Air Pin 1.2 mm
- 1 x 510 DripTip of the Taifun® GTR
- 1 x Typhoon Spaced Coil 1.7Ω
- 1 x replacement O-rings
- 1 x 1.3mm Allen Key
- 1 x 0.9mm Allen Key
- 1 x Instruction Manual
